Apogee ensemble Betriebsanweisung PDF herunterladen (Seite 9)

Display

Input Settings Display Screen

This screen appears when an Input Select button is held for 1 second. The parameters

available will change depending on the channel being viewed, and the settings made.

For navigation instructions, see page 12.

1. Input Source

a. Mic - XLR input is sent through the microphone preamp

b. Inst - 1/4” input is sent through a Hi-Z to Low-Z circuit then to the microphone preamp

c. +4dBu/-10dBV - Line level signal from XLR input bypasses preamp circuit.

2. Soft Limit - Attenuates transient peaks of the analog input at a threshold of -4dBfs

before the signal is sent to the A/D converter (see page 53).

3. Group - 5 groups available. The gain of input channels set to the same group number

are adjusted simultaneously. Any level oﬀsets that exists before inputs are grouped will

be preserved after a group is chosen.

4. Insert - Directs signal from the Input 1 or 2 Insert Return jack to the A/D converter (Insert

Send is always active and can be utilized as a preamp line-out).

5. ⌀ (Polarity) - Inverts the input signal’s polarity

6. 48v - Toggles phantom power on/oﬀ

7. ⦧ - Toggles High Pass ﬁlter (80Hz, 12dB/octave) on/oﬀ

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 58 59

Keine Kommentare

Apogee ensemble Betriebsanweisung Seite 9