Apogee TS-100 Bedienungshandbuch PDF herunterladen (Seite 7)

7



digit in the IP rating indicates protection against particle entry. A 5 indicates minimal dust entry with no

interference with fan operation. The second digit indicates water protection. A 5 indicates that water

sprayed on the fan from any direction shall have no harmful effects. Typical fans have particle and water

protection ratings of 2 to 3, indicating moderate particle and water protection, but no dust protection.

Dimensions: 22 cm height, 27 cm diameter

Mass: 840 g

Cables: 5 m of shielded, twisted-pair wire for fan and air temperature sensors

Additional cable available in multiples of 5 m

Santoprene rubber jacket (high water resistance, high UV stability, flexibility in cold conditions)

Pigtail lead wires

ST-110 (Precision Thermistor)

Measurement Range: -50 to 70 C

Measurement Uncertainty: 0.1 C (from 0 to 70 C)

0.15 C (from -35 to 0 C)

Measurement Repeatability: < 0.01 C

Non-stability (Long-term Drift): < 0.02 C per year (when used in non-condensing environments where

the annual average temperature is less than 30 C; continuously high temperatures or continuously humid

environments increase drift rate)

Equilibration Time: 5 s

Self-Heating: < 0.01 C (typical, assuming pulsed excitation of 2.5 V DC)

0.08 C at 5 C (maximum, assuming continuous input excitation of 2.5 V DC)

Operating Environment: -50 to 70 C

0 to 100 % relative humidity

Input Voltage Requirement: 2.5 V DC excitation (recommended, see OPERATION AND

MEASUREMENT section)

Output Voltage Range: 0 to 2.5 V DC (assuming input excitation of 2.5 V DC)

Current Drain: 0.1 mA DC at 70 C (maximum, assuming continuous input excitation of 2.5 V DC)

Dimensions: 7 cm length, 0.2 cm diameter

Mass: 60 g

1 2 3 4 5 6 7 8 9 10 11 12 ... 18 19

Keine Kommentare

Apogee TS-100 Bedienungshandbuch Seite 7